Installation Guide

Doc.ID: 225 Effective: 4-30-2015

Title: Installation LVP and WPC LVP Reducer Rev.:0

LVP and WPC LVP Reducer

Reducer is used to transition between flooring of different heights. For example: Vinyl to wood flooring or

vinyl to concrete or wood subfloor. It can also be used to cap the edge of flooring. For example: At fire place

hearth or door threshold.

Step 1.

Position the reducer trim and the flooring as depicted in the

picture. The overlapping edge of the trim rests on top of the

flooring edge. Ensure there is expansion gap between the

edge of the free planks and the trim.

Step 2.

Mark a line where the other flooring has to be trimmed.

Step 3.

Cut the excess other flooring off. Apply beads of glue on the

subfloor where the leading edge of the trim will be adhered to

the subfloor.

Step 4.

Press the trim against the subfloor to ensure secure contact

with subfloor along the length of the trim. Clean off excess

glue.

PAGE 1
Doc.ID: 225 Title: Installation LVP and WPC LVP Reducer Effective: 4-30-2015 Rev.:0 LVP and WPC LVP Reducer Reducer is used to transition between flooring of different heights. For example: Vinyl to wood flooring or vinyl to concrete or wood subfloor. It can also be used to cap the edge of flooring. For example: At fire place hearth or door threshold. Step 1. Position the reducer trim and the flooring as depicted in the picture. The overlapping edge of the trim rests on top of the flooring edge.
PAGE 2
Doc.ID: 225 Title: Installation LVP and WPC LVP Reducer Effective: 4-30-2015 Rev.:0 Step 5. Allow the glue to dry or cure. Follow the adhesive manufacturer’s instruction for the length of time for the glue to dry. Note on Adhesive We do not make a recommendation on specific glue to use. Most general purpose construction glue should work. There are a variety of suitable adhesives. Call the manufacturer if you have any question about any of the glue. Select the one which is best suited to your own needs.