Instructions / Assembly

Customer Service Hotline [phone]-PURE
Page 2
Home Master
®
Water Filter Owners Manual
Contents:
Instruction book: detailed descriptions, photos and troubleshooting guide
Mounting bracket & screws assembled with housing cap(s)
Housing sump(s) with filter(s), o-ring, and silicone grease
Filter housing wrench
Maintenance Schedule
SEE PAGE 8
General System Specifications (See page 8 for additional details)
• Feed water: PSI 20 - 90 PSI ; for pressure greater than 75 PSI install a pressure
regulator set to 75 PSI
• Feed water Temperature: 40˚ - 100˚(F)
• IRON BACTERIA: NONE
• Your results may vary depending on regular maintenance, general condition of unit, and
initial water supply. Filter not designed to treat microbially unsafe or non-potable water
without adequate disinfection before and after unit.
Customer Service Hotline [phone]-PURE
Page 7
Home Master
®
Water Filter Owners Manual
purged. Inspect system carefully for leaks. If a leak is found, first follow the
shut off de-pressurization procedure and then remove the housing to inspect
the o-ring to ensure that it is seated properly. Then retighten.
10. Flush the system by turning on a few cold-water faucets. Allow the water to
run until the air and carbon has been purged. Water may be cloudy initially.
New activated carbon filter cartridges may contain loose carbon and air
bubbles after installation.