User Manual

ManualsBrandsHome Styles ManualsKitchen5033-94

Part List

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Tools required for assembly : Phillips screwdriver

88 5033 942

Nantucket

Kitchen Island

Side Panel

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Back Stretcher

2 pcs.

Back Panel

2 pcs.

Shelf

4 pcs.

Shelf

1 pc.

Base

1 pc.

Door

1 pc.

Door

1 pc.

For assembly see instructions in carton 88 5033 941

Hex Wrench

1 pc.

Head Cap Bolt

24 pcs. (+1 extra)

Cam Lock

16 pcs.(+1 extra)

Cam Lock Screw

16 pcs.(+1 extra)

Machine Screw

6 pcs.

Adjustable Pin

20 pcs. (+1 extra)

Small

Hex Wrench

1 pc.

Pull Handle

2 pcs.

Wood Screw (short)

for Drawer Base Part

6 pcs. (+1 extra)

Wood Screw (long)

for Drawer Side Part

8 pcs. (+1 extra)

Pull Handle

2 pcs.

Hardware List

Tools recommended for assembly :Level

Plinth

2 pcs.

H2.

Front Rail

1 pc.

Wood Screw

for Hinge

27 pcs. (+2 extra)

Patent 8,584,600 B2

Summary of content (6 pages)

PAGE 1
88 5033 942 Nantucket Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Patent 8,584,600 B2 Part List B. Side Panel 1 pc. C. Side Panel 1 pc. D. Side Panel 1 pc. H2. Front Rail 1 pc. E.
PAGE 2
Assembly Instructions 2/6 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. STEP 1 Wood Screw A1 Attach Top (A1) to Top (A2) with Wood Screws. Put Cam Lock Screws into the pre-drilled holes of Top (A1), Side Panel (D), (E), (F), (G) and tighten.
PAGE 3
Assembly Instructions 3/6 STEP 2 D Attach Side Panel (B) to Base (P) with Head Cap Bolts. B Attach Side Panels (D) and (E) to Base (P) with Head Cap Bolts. (see Figure 1) E P Head Cap Bolt H2 H1 I J K STEP 3 Attach Front Rail (H1) and Front Rail (H2) to unit using Cam Locks. (see Figure 1) Attach Back Stretcher (I) to unit using Cam Locks. K I Slide Back Panel (K) into Place. Attach Stretcher (J) to unit then slide Back Panel (K) into place.
PAGE 4
Assembly Instructions 4/6 Cam Lock F STEP 4 P Attach Side Panel (C) to Base (P) with Head Cap Bolts. G C Attach Side Panels (F) and (G) to unit with Head Cap Bolts. Head Cap Bolt S Q R P Head Cap Bolt Q S STEP 5 Attach Plinths (Q) to Base (P) with Head Cap Bolts. Attach Plinths (S) and Leg Support (R) to unit with Head Cap Bolts.
PAGE 5
Assembly Instructions 5/6 Wood Screw STEP 6 O N Attach Back Support (N) and (O) to unit with Wood Screws into pre-drilled holes. Cam Lock A L Figure 1 V L M L T U Figure 2 L STEP 7 Place Top (A) onto unit with Cam Locks. Adjustable Pin Attach Doors (T) and (U) by sliding the door lift hinges into the side panels lift hinges. (see Figure 1) Assemble Pull Handles to Doors (T) and (U) with Machine Screws.
PAGE 6
Assembly Instructions 6/6 Drawer V1 V3 (Figure 1) STEP 1 Attach V1 to V3 and V4, using a Phillips screwdriver and long wood screws (4X), tighten halfway. V2 V4 Attach V2 to V3 and V4 using long wood screws (4X), tighten halfway. (see Figure 1) MAKE SURE ROLLER IS ON THE BACK STEP 2 Slide V5 into the grooves in V3 and V4. Be sure to push V5 all the way forward to it meets V1.