User Manual

V2
V3
V4
V5
V1
(Figure 3)
Assembly Instructions 6/6
Insert wood screws (6X)short
into the pre-drilled holes in V5,
tighten screws. (see Figure 3)
Attach hardware pulls with
machine screws.
(see Figure 4)
Slide V5 into the grooves in V3
and V4. Be sure to push V5 all
the way forward to it meets V1.
(see Figure 2)
STEP 4
Tighten all screws used in
drawer assembly.
(Figure 1)
(Figure 2)
MAKE SURE ROLLER
IS ON THE BACK
V2
V3
V4
V5
V1
Drawer
Part List
V1.
Front Part
1 pc.
V5.
Base Part
1 pc.
V2.
Back Part
1 pc.
V3.
Side Part
1 pc.
V4.
Side Part
1 pc.
(Figure 4)
STEP 1
STEP 2
STEP 3
Attach V1 to V3 and V4, using
a andPhillips screwdriver
wood screws (4X),long
tighten halfway.
Attach V2 to V3 and V4 using
wood screws (4X),long
tighten halfway. (see Figure 1)
V1
V2
V4
V3