Installation Guide

Assembly Instructions 3/3
Figure 3
Figure 2
Adjustable Pin
B
STEP 3
Attach Top (A) and Base (C) to unit
with Flat Washers, Spring Washers
and Head Cap Bolts, tightening all
bolts only half way.
Tighten all Head Cap Bolts used in all steps.
A
C
Spring Washer
Flat Washer
Head Cap Bolt
STEP 4
Turn unit to its’ upright position.
Insert Adjustable Pins into unit at desired level.
(See Figure 2)
Place Shelf (B) into position.
Level unit by adjusting the adjustable
levelers on the bottom of unit.
(See Figure 3)
Note: Unit must be level to work property.