Instructions / Assembly

Part List

Hardware List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Spring Washer

4 pcs.(+1 extra)

Flat Washer

4 pcs.(+1 extra)

Caster

5 pcs.

Seat

1 pc.

M6x16

Head Cap Bolt

4 pcs.(+1 extra)

Hex Wrench

1 pc.

Key Wrench

1 pc.

Small

Hex Wrench

1 pc.

88 5079 53

Swivel Chair

Mechanism

.1 pc

Cylinder

.1 pc

Base

.1 pc

PAGE 1
88 5079 53 Swivel Chair IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Seat 1 pc. B. Mechanism 1 pc. C. Cylinder 1 pc. D. Base 1 pc. Hardware List Key Wrench 1 pc. Hex Wrench 1 pc.
PAGE 2
Assembly Instructions 2/2 IMPORTANT * Do not tighten up all the Head Cap Bolts until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Use a soft cloth between these parts and the floor. Head Cap Bolt Spring Washer Flat Washer C STEP 1 Attach Mechanism (B) to Seat (A) with Head Cap Bolts, Spring Washers and Flat Washers. (See Figure 1) B Slide Cylinder (C) into position. A Figure 1 STEP 2.