Instructions / Assembly

ManualsBrandsHome Styles ManualsAV AccessoriesFranklin Media TV Stand Cabinet

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Base

1 pc.

Top

1 pc.

Back Stretcher

1 pc.

Back Panel

1 pc.

Back Panel

1 pc.

Back Strip

1 pc.

Tools required for assembly : Phillips screwdriver, Drill, 3/8” Drill Bit, Level

Front Rail

1 pc.

88 5081 101

Entertainment Credenza

For assembly see instructions in carton 88 5 102081

Shelf

2 pcs.

Hardware List

Adjustable Pin

8 pcs.(+1 extra)

Pull Handle

2 pcs.

M4x12

Machine Screw

2 pcs.

Bolt

for Back Panel

2 pcs.(+1 extra)

M3x16

Wood Screw

for Magnet

4 pcs.(+1 extra)

M3x16

Wood Screw

for Hinge

12 pcs.(+1 extra)

Magnet

2 pcs.

Summary of content (6 pages)

PAGE 1
88 5081 101 Entertainment Credenza IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List E. Base 1 pc. A. Top 1 pc. H. Back Panel 1 pc. F. Front Rail 1 pc. J. Back Strip 1 pc. G.
PAGE 2
88 5081 102 Entertainment Credenza IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List B. Side Panel 1 pc. D. Middle Panel 1 pc. C. Side Panel 1 pc. K. Door 1 pc. L. Door 1 pc.
PAGE 3
Assembly Instructions 2/5 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. * Use a soft cloth between these parts and the floor. STEP 1 Attach Side Panel (C) and Middle Panel (D) to Base (E), then flip the Locks. (See Figures 1 and 2) D C Figure 1 E Figure 2 STEP 2 Attach Magnets to Front Rail (F) with Wood Screws for Magnet.
PAGE 4
Assembly Instructions 3/5 F G B STEP 3 Attach Front Rail (F) and Back Stretcher (G) to unit, then flip the Locks. Attach Side Panel (B) to unit, then flip the locks. H J I STEP 4 Bolt for Back Panel Slide Back Panel (I), Back Strip (J) and Back Panel (H) into position. Insert Bolts for Back Panel into the pre-drilled holes of Back Panels (H) and (I).
PAGE 5
Assembly Instructions 4/5 A K L M Figure 5 M Figure 6 Figure 7 Figure 8 STEP 5 Attach Top (A) to the unit, then flip the Locks. Insert Adjustable Pins into side panels and middle panel at the desired level. (See Figure 5) Place Shelves (M) into position. Attach Doors (K) and (L) to unit with Wood Screws for Hinges. (See Figure 6) Assemble Pull Handles to Doors (K) and (L) with Machine Screws. (See Figure 7) To level the unit, adjust the adjustable levelers on the bottom of legs.
PAGE 6
Assembly Instructions 5/5 Attention! To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly! Wall Screw Anchor in wall 3/8” wall hole Bracket on wall Wood Screw Place unit at desired location. Drill a 3/8” hole in wall at the appropriate location. Insert Anchor into the wall hole and attach Bracket with Wall Screw. Attach Bracket at pre-drilled hole at top of unit with Wood Screw.