How to Guide

ManualsBrandsHome Styles ManualsDining Kitchen StorageBlack/Stainless China Cabinet with Wine Storage

Buffet Unit Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Hardware List

Side Panel

.1 pc

Back Panel

3 pcs.

Middle Panel

1 pc.

Middle Panel

1 pc.

Front Piece

2 pcs.

Fixed Shelf

1 pc.

Side Panel

1 pc.

Drawer

3 pcs.

Base

1 pc.

(Knock-Down Construction, please refer to

the last page of these instructions for steps

to complete assembling drawers)

Back Piece

2 pcs.

Leg

2 pcs.

Door

1 pc.

Shelf

2 pcs.

Wine Grid

2 pcs.

Wine Grid

2 pcs.

Door

1 pc.

Front Piece

1 pc.

Back Stretcher

1 pc.

Back Stretcher

1 pc.

Front Piece

1 pc.

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

Hex Wrench

1 pc.

Head Cap Bolt (long)

8 pcs. (+1 extra)

Head Cap Bolt

4 pcs. (+1 extra)

Cam Lock

14 pcs.(+1 extra)

Cam Lock Screw

14 pcs.(+1 extra)

Machine Screw

8 pcs.

Cross Dowel

8 pcs.(+1 extra)

Wood Screw (short)

for Drawer Base Part

12 pcs. (+1 extra)

Wood Screw (long)

for Drawer Side Part

24 pcs. (+1 extra)

Drawer

Pull Handle

3 pcs.

Door

Pull Handle

2 pcs.

Adjustable Pin

8 pcs. (+2 extra)

Wood Screw

for Back Panel

12 pcs. (1 extra)

Small

Hex Wrench

1 pc.

88 5100 002

Buffet with Doors

and Drawers

Tools required for assembly : Phillips screwdriver

Tools recommended for assembly :Level

Revised : 14Mar2011

Summary of content (5 pages)

PAGE 1
88 5100 002 Buffet with Doors and Drawers IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Buffet Unit Part List G. Back Stretcher 1 pc. H. Back Stretcher 1 pc. A. Side Panel 1 pc. C. Middle Panel 1 pc. B.
PAGE 2
Assembly Instructions 2/5 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. Cam Lock Screw STEP 1 Put Cam Lock Screws into the pre-drilled holes of Side Panel (A) and (B), and tighten up.
PAGE 3
Assembly Instructions 3/5 K I K J Cam Lock Screw Cam Lock C L D B Cross Dowel Head Cap Bolt (long) STEP 3 Attach Middle Panel (C) to the unit with Cross Dowels and Head Cap Bolts (long). Attach Fixed Shelf (L) and Middle Panel (D) to the unit, using Cam Lock Screws, Cam Locks, Cross Dowels and Head Cap Bolts. Assemble Front Piece (I), (J) and (K), then attach it to the unit with Cam Lock. Attach Side Panel (B) to the unit with Cam Locks.
PAGE 4
Assembly Instructions 4/5 STEP 5 Cam Lock Screw Now, you’ll be able to create your own Buffet and Hutch. Make your own choice of the ‘Top’, wood or stainless steel. Put the Cam Lock Screw into the pre-drilled holes at Top. STEP 6 Turn the unit back to its normal position. Cam Lock Place Top onto the unit, using Cam Locks. T Assemble Wine Grid (O) and (P). (see Figure 1) T Slide Wine Grid and Drawer (T) into place. Insert Adjustable Pins into both side panels and middle panels at the desired level.
PAGE 5
Assembly Instructions 5/5 Drawer T1 T3 T4 T2 (Figure 1) Using a philips screwdriver, insert 1” screws into the pre-drilled holes as shown, tighten half way. (see Figure 1) MAKE SURE ROLLER IS ON THE BACK Slide the Plywood Base Part (T5) into the grooves on Side Parts (T3) and (T4). Be sure to push the plywood all the way forward so it meets the Front Part (T1).