Use and Care Manual

Assembly Instructions 2/2

IMPORTANT

* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.

* Do not tighten up all the bolts until each part is properly assembled.

* Use a soft cloth between these parts and the floor.

Figure 1

Figure 2

Head Cap Bolt

Head Cap Bolt (Short)

Head Cap Bolt (Long)

Hex wrench

Flat Washer

Spring Washer

STEP 1

Attach Legs (B) and (C) to Seat (A) with Flat Washers.

Spring Washers and Head Cap Bolts.

Tighten all Head Cap Bolts only half way.

(See Figure 1)

STEP 2

Attach Back Frame (D) to unit with Flat Washers, Spring Washers,

Head Cap Bolts (short) and Head Cap Bolts (long).

(See Figure 2)

Tighten all Head Cap Bolts.