Installation Guide

ManualsBrandsHome Styles ManualsDining Chairs5520-802

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Hardware List

Tools required for assembly : Phillips screwdriver

Seat

1 pc.

Back Frame

.1 pc

Side Stretcher

1 pc.

Side Stretcher

1 pc.

Head Cap Bolt

4 pcs.(+1 extra)

Spring Washer

11 pcs.(+1 extra)

Flat Washer

11 pcs.(+1 extra)

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

Key Wrench

1 pc.

Head Cap Bolt

(long)

4 pcs.(+1 extra)

Wood Screw

4 pcs.(+1 extra)

Head Cap Bolt

(Short)

3 pcs.(+1 extra)

Leg

1 pc.

Leg

1 pc.

Aspen Dining Chair

88 5520 80

Small

Hex Wrench

1 pc.

Summary of content (2 pages)

PAGE 1
88 5520 80 Aspen Dining Chair IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Seat 1 pc. E. Side Stretcher 1 pc. B. Leg 1 pc. C. Leg 1 pc. F. Side Stretcher 1 pc. D. Back Frame 1 pc.
PAGE 2
Assembly Instructions IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. Wood Screw Flat Washer Head Cap Bolt Spring Washer Spring Washer Head Cap Bolt C Hex Wrench Flat Washer F STEP 1 Head Cap Bolt Assembly (Legs Part) Attach Leg (B) and (C) to Seat (A) with Flat Washers ,Spring Washers and Head Cap Bolts. Tighten Head Cap Bolts only half way.