Instructions / Assembly

ManualsBrandsHome Styles ManualsCarts, Islands & Utility TablesSeaside Lodge Hand Rubbed White Kitchen Island with Quartz Stone Top

Part List

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

For assembly see instructions in carton 88 5523 942

88 5523 943

Kitchen Island

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Top

1 pc.

Summary of content (8 pages)

PAGE 1
88 5523 943 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top 1 pc.
PAGE 2
88 5523 941 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List G. Front Rail 1 pc. H. Front Rail 1 pc. I. Base 1 pc. L. Drawer 2 pcs. J. Door 1 pc. K. Shelf 2 pcs. M. Drawer 2 pcs.
PAGE 3
88 5523 942 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List B. Side Panel 1 pc. C. Middle Panel 1 pc. E. Back Panel 1 pc. D. Side Panel 1 pc. F. Back Panel 1 pc.
PAGE 4
Assembly Instructions 2/6 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * Use a soft cloth between these parts and the floor. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. Cam Lock Screw STEP 1 A Put Cam Lock Screws into the pre-drilled holes of Top (A), Side Panels (B), (D), Middle Panel (C), Back Panel (E) and Base (I) and tighten.
PAGE 5
Assembly Instructions 3/6 STEP 2 Attach Back Panel (E) to Side Panel (B) with Cam Locks. (see Figure 2) F Attach Back Panel (F) to unit with Cam Locks. E B Cam Lock Figure 2 STEP 3 C Attach Front Rails (H) and (G) to Middle Panel (C). Attach unit from Step 2 to unit from Step 3 with Cam Locks. G H Cam Lock D Cam Lock STEP 4 Attach Side Panel (D) to unit with Cam Locks.
PAGE 6
Assembly Instructions 4/6 Long Screw Flat Washer STEP 5 Attach Base (I) to unit with Washers, Long Screws and Cam Locks. (see Figure 3) Attach Magnet to unit with Wood Screws for Magnet. (see Figure 4) I Cam Lock Wood Screw for Magnet Figure 4 Figure 3 Figure 5 Figure 6 STEP 6 Magnet Figure 7 Turn the unit upright position, attach Top (A) to unit with Cam Locks. A Cam Lock Slide Drawers (L) and (M) into position.
PAGE 7
Assembly Instructions 5/6 Drawer L L1 L3 L4 L2 (Figure 1) STEP 2 STEP1 Attach L1 to L3 and L4, using a Phillips screwdriver and long wood screws (4X), tighten halfway. Slide L5 into the grooves in L3 and L4. Be sure to push L5 all the way forward so it meets L1. (See Figure 2) MAKE SURE ROLLER IS ON THE BACK L1 Attach L2 to L3 and L4 using long wood screws (4X), tighten halfway.
PAGE 8
Assembly Instructions 6/6 Drawer M M1 M3 M4 M2 (Figure 1) STEP1 Attach M1 to M3 and M4, using a Phillips screwdriver and long wood screws (6X), tighten halfway. Slide M5 into the grooves in M3 and M4. Be sure to push M5 all the way forward so it meets M1. (See Figure 2) MAKE SURE ROLLER IS ON THE BACK Attach M2 to M3 and M4 using long wood screws (6X), tighten halfway.