Instructions / Assembly

Assembly Instructions 4/6
Flat Washer
Long Screw
STEP 5
Attach Base (I) to unit with Washers, Long Screws
and Cam Locks. (see Figure 3)
Attach Magnet to unit with Wood
Screws for Magnet. (see Figure 4)
STEP 6
Turn the unit upright position, attach Top (A)
to unit with Cam Locks.
Slide Drawers (L) and (M) into position.
Insert Adjustable Pins into side panel and
middle panel at desired level, then place
Shelves (K) into position.
Attach Door (J) by sliding the door lift hinges
into the side panels lift hinges. (see Figure 5)
Assemble Knob to Door (J) with Machine
Screws. (see Figure 6)
To level the unit, adjust the adjustable
levelers on the bottom of unit. (see Figure 7)
Note: Unit must be level to work properly.
Cam Lock
Figure 5
Figure 3
Figure 4
Cam Lock
Figure 7
L
Wood Screw
for Magnet
Magnet
I
L
M
M
K
K
J
A
Figure 6
Adjustable Pin