Manual

ManualsBrandsHome Styles ManualsTelevisions5527-09

Part List

Hardware List

Base

1 pc.

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Top

1 pc.

Cam Lock

19 pcs.(+4 extra)

Cam Lock Screw

19 pcs.(+1 extra)

88 5527 09

Entertainment Stand

Homestead

Plinth

1 pc.

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

Pull Handle

2 pcs.

Adjustable Pin

12 pcs.(+1 extra)

Machine Screw

2 pcs.(+1 extra)

Shelf

2 pcs.

Side Panel

.1 pc

Side Panel

1 pc.

D1.

Middle Panel

.1 pc

D2.

Middle Panel

.1 pc

Back Panel

2 pcs.

Back Panel

1 pc.

Door

1 pc.

Door

1 pc.

Shelf

1 pc.

Leg

4 pcs.

Wood Screw

for Magnet

4 pcs.(+1 extra)

Magnet

2 pcs.

Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level

Summary of content (4 pages)

PAGE 1
88 5527 09 Homestead Entertainment Stand IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top 1 pc. C. Side Panel 1 pc. B. Side Panel 1 pc. D1. Middle Panel 1 pc. E. Base 1 pc. F.
PAGE 2
Assembly Instructions 2/4 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. Magnet STEP 1 Wood Screw A Attach 2X Magnets to front rail of Top (A) with Wood Screws. Insert Cam Lock Screws into the pre-drilled holes of Top (A), Side Panel (B) and (C), Base (E), Plinth (F).
PAGE 3
Assembly Instructions 3/4 D1 D2 Cam Lock Figure 1 Cam Lock Screw STEP 2 E Attach Middle Panel (D1) and (D2) onto Base (E) with Cam Locks (see Figure 1). B F G G E C G Cam Lock STEP 3 Attach Plinth (F) to the unit with Cam Locks. Attach Side Panel (B) and (C) to the unit with Cam Locks. Attach Legs (G) into the pre-drilled holes of Base (E) and tighten.
PAGE 4
Assembly Instructions 4/4 A Cam Lock Figure 2 J H I H K Figure 3 STEP 4 Slide Back Panels (H) and (I) into place. Place Top (A) onto the unit, using Cam Locks. Attach Doors (J) and (K) by sliding the door lift hinges into the side panels lift hinges (See figure 2) Assemble Pull Handles to Doors (J) and (K) with Machine Screws. (See figure 3) Adjustable Pin STEP 5 Insert Adjustable Pins into side panels and middle panels at the desired level. Place Shelves (L) and (M) into position.