How to Guide

ManualsBrandsHome Styles ManualsIndoor Benches5527-49

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Casual Attire For Today's Home

Hardware List

Tools required for assembly : Phillips screwdriver

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

Hall Tree Stand

(Warm Oak)

88 5527 49

Wood Screw for

Spring

8 pcs. (+1 extra)

Wood Screw

for Hook

8 pcs. (+1 extra)

Seat

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Front Panel

1 pc.

Back Stretcher

1 pc.

Back Panel

1 pc.

Back Stretcher

2 pcs.

Arm

1 pc.

Arm

1 pc.

Base

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Front Stretcher

1 pc.

Top

1 pc.

Leg

1 pc.

Rail

1 pc.

Back Panel

2 pcs.

Back Panel

1 pc.

Back Stretcher

1 pc.

Back Stretcher

1 pc.

Spring Support

2 pcs.

Small Hex Wrench

1 pc.

Hex Wrench

1 pc.

Head Cap Bolt

15 pcs. (+1 extra)

Cam Lock

24 pcs. (+1 extra)

Cam Lock Screw

24 pcs. (+1 extra)

Hook

4 pcs.

Wood Screw for

Back Panel

24 pcs. (+1 extra)

Summary of content (6 pages)

PAGE 1
88 5527 49 Hall Tree Stand (Warm Oak) IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Casual Attire For Today's Home Part List A. Seat 1 pc. E. Back Stretcher 1 pc. F. Back Stretcher 2 pcs. K. Base 1 pc.
PAGE 2
Assembly Instructions 2/6 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. Head Cap Bolts STEP 1 Attach Legs (J) to Base (K) with Head Cap Bolts. J J J J K STEP 2 Put Cam Lock Screws into the pre-drilled holes of Side Panel (B), (C), (N), (O) Base (K), Top (M) and tighten.
PAGE 3
Assembly Instructions 3/6 D B E Cam Lock G C F STEP 3 Attach Back Stretcher (E) and (F) to Side Panel (B) using Cam Locks. Slide Back Panel (G) into place. Attach Front Panel (D) to Side Panel (B) using Cam Locks. Attach Side Panel (C) to unit using Cam Locks. Cam Lock K STEP 4 Attach Base (K) to unit using Cam Locks.
PAGE 4
Assembly Instructions 4/6 O Cam Lock STEP 5 Attach Front Stretcher (L) Back Stretcher (F) and (S) to Side Panel (N) using Cam Locks. G F Q Slide Back Panels (G) to unit. L Attach Rail (P) to Back Stretcher (S) and slide Back Panels (Q) to unit. P S T Q Attach Back Stretcher (T) to unit using Cam Lock. Attach Side Panel (O) to unit using Cam Locks. N Cam Lock STEP 6 M Attach Top (M) to unit using Cam Locks. Attach Arm (H) and (I) to unit with Head Cap Bolts.
PAGE 5
Assembly Instructions 5/6 STEP 7 Place the Top unit onto the Base Unit with Head Cap Bolts. Head Cap Bolt A Spring Support Wood Screw for Spring Support Spring Support A Head Cap Bolt Figure 1 STEP 8 Place Seat (A) upside down on a soft cloth then attach Spring Support to the Seat (A) with Wood Screws. (see Figure 1) Attach the Seat (A) to the Base unit with Head Cap Bolts.
PAGE 6
Assembly Instructions 6/6 Hook Figure 2 Hook STEP 9 Attach Hooks to the top of unit with Wood Screws for Hooks. (see Figure 2) Wood Screw for Hook Wood Screw for Back Panel STEP 10 Attach Wood Screws for Back Panel to the back of the unit.