User Manual

ManualsBrandsHome Styles ManualsTelevisions5536-09

Part List

Hardware List

To p

Cam Lock

Adjustable Pin

12 pcs.(+4 extra)

Cam Lock Screw

12 pcs.(+1 extra)

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

12 pcs.(+1 extra)

Head Cap Bolt

6 pcs. (+1 extra)

Hex Wrench

1 pc.

88 5536 09

Entertainment Stand

City Chic

Casual Attire For Today's Home

Side Panel

.1 pc

Side Panel

1 pc.

D2.

Middle Panel

.1 pc

D1.

Middle Panel

.1 pc

Base

1 pc.

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Shelf

2 pcs.

Door

1 pc.

Door

1 pc.

Shelf

1 pc.

Back Panel

2 pcs.

Back Panel

1 pc.

Small

Hex Wrench

1 pc.

Tools required for assembly : Phillips screwdriver

Wood Screw

for Magnet

4 pcs.(+1 extra)

Magnet

2 pcs.

Summary of content (4 pages)

PAGE 1
88 5536 09 City Chic Entertainment Stand IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Casual Attire For Today's Home Part List C. Side Panel 1 pc. B. Side Panel 1 pc. A. Top D1. Middle Panel 1 pc.
PAGE 2
Assembly Instructions 2/4 IMPORTANT Do not tighten up all the screws until each part is properly assembled. Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. Cam Lock Screw Magnet Figure 1 A STEP1 Attach 2X Magnets to Top (A) by using Wood Screws in the pre-drilled holes (see Figure 1). Insert Cam Lock Screws into the pre-drilled holes of Top (A), Side Panel (B), (C) and Base (E).
PAGE 3
Assembly Instructions 3/4 STEP 3 D1 Attach Middle Panel (D1) and (D2) onto Base (E) with Cam Locks (see Figure 2). D2 Cam Lock Cam Lock Screw E Figure 2 B Cam Lock E C Cam Lock Screw STEP4 Attach Side Panel (B) and (C) to the unit with Cam Locks.
PAGE 4
Assembly Instructions 4/4 A Head Cap Bolt I H Cam Lock J G H F K G Adjustable Pin Figure 3 Figure 4 STEP 5 Slide Back Panels (H) and (I) into place. Place Top (A) onto the unit using Head Cap Bolts and Cam Locks. Insert Adjustable Pins into side panels and middle panels at the desired level (see Figure 3). Place Shelves (G) and (F) into position. Attach Doors (J) and (K) by sliding the door lift hinges into the side panels lift hinges.