Manual

ManualsBrandsHome Styles ManualsTelevisions5539-120

Part List

Base

1 pc.

Drawer

1 pc.

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Top

1 pc.

88 5539 1201

Geo TV Entertainment Center

Tools required for assembly : Phillips screwdriver

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

Hardware List

For assembly see instructions in carton 88 5539 1202

Cam Lock

31 pcs.(+6 extra)

Cam Lock Screw

31 pcs.(+2 extra)

Adjustable Pin

20 pcs.(+1 extra)

Pull Handle

3 pcs.

Machine Screw

6 pcs.

Back Panel

1 pc.

Back Panel

1 pc.

Wood Screw

for Back Panel

16 pcs.(+1 extra)

Wood Screw

for Drawer

14 pcs.(+1 extra)

Wood Screw

for Drawer hinge

6 pcs.(+1 extra)

Shelf

4 pcs.

(Knock-Down Construction, please refer to the last page

of these instructions for steps to assemble drawers)

Wood Screw

for Magnet

4 pcs.(+1 extra)

Magnet

2 pcs.

Summary of content (6 pages)

PAGE 1
88 5539 1201 Geo TV Entertainment Center IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List J. Back Panel 1 pc. A. Top 1 pc. K. Back Panel 1 pc. I. Base 1 pc. R. Drawer 1 pc. P. Shelf 4 pcs.
PAGE 2
88 5539 1202 Geo TV Entertainment Center IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List (in this carton) D. Middle Panel 1 pc. B. Side Panel 1 pc. E. Middle Panel 1 pc. C. Side Panel 1 pc. F.
PAGE 3
Assembly Instructions 2/5 STEP 1 Wood Screw Magnet Cam Lock Screw Attach 2X Magnets to Top (A) by using Wood Screws in the pre-drilled holes (see Figure 1). Figure 1 A Insert Cam Lock Screws into the pre-drilled holes of Top (A), Middle Panels (D), (E), Feet (F), (G) and Base (I) with Cam Lock Screws. D E F G I (Figure 2) STEP 2 Insert Cam Lock Screws into the pre-drilled holes of Base (I). Assemble Foot (F), (G) and (H) with Cam Locks (see Figure 2).
PAGE 4
Assembly Instructions 3/5 Cam Lock Screws Cam Lock STEP 3 Assemble Middle Panels (D) and (E) with Fixed Shelf (M), using Cam Locks. D M E B C STEP 4 Attach Middle Panel unit and Side Panels (B) and (C) to base unit in Step 2 with Cam Locks. L J STEP 5 Slide Back Panels (J), (K) and (L) into position.
PAGE 5
Assembly Instructions 4/5 A Adjustable Pin (Figure 3) N P Q P O P (Figure 4) P R (Figure 5) STEP 6 Attach Doors (N) and (O) by sliding the door lift hinges into the side panels lift hinges. (See figure 3) Assemble Pull Handles to Doors with Machine Screws. (See figure 4) Place Top (A) onto the unit with Cam Locks, then insert Adjustable Pins into side panels and middle panels at the desired level. (See figure 5) Place Shelves (P), (Q) and Drawer (R) into position.
PAGE 6
Assembly Instructions 5/5 Drawer (R) STEP 1 R5 Attach R2 to R5, using a Phillips screwdriver and long wood screws (4X), tighten halfway. (see Figure 1) R2 Figure 1 STEP 2 Attach R3 and R4 to the unit with long wood screws (10X), tighten halfway. R3 R2 Attach R1 to R5 with short wood screws (6X). (see Figure 2) R5 Tighten all screws used in drawer assembly. R4 R1 Figure 2 STEP 3 Assemble Pull Handle with machine screws. (see Figure 3) Figure 3 Part List R1. Front Part 1 pc. R2.