User guide

ManualsBrandsHome Styles ManualsTelevisions5549-09

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Part List

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

88 5549 09

Crescent Hill

TV Stand

Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level

Hex Wrench

1 Pc.

Cam Lock

12 Pcs. (+4 extra)

Cam Lock Screw

12 Pcs. (+1 extra)

Head Cap Bolt

4 Pcs. (+1 extra)

Magnet

2 Pcs.

M6x25

M3x10 M3x15 M4x25

Adjustable Pin

8 Pcs.

Tapered Wood Screw

4 Pcs. (+1 extra)

Wood Screw

12 Pcs. (+1 extra)

Small Hex Wrench

1 Pc.

Pull Handle

2 Pcs.

Machine Screw

4 Pcs.

Top

1 Pc.

Base

1 Pc.

Side Panel

1 Pc.

Side Panel

1 Pc.

Middle Panel

1 Pc.

Back Panel

2 Pcs.

Back Panel

1 Pc.

Shelf

1 Pc.

Shelf

2 Pcs.

Door

1 Pc.

Door

1 Pc.

Summary of content (4 pages)

PAGE 1
88 5549 09 Crescent Hill TV Stand IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top 1 Pc. C. Side Panel 1 Pc. B. Base 1 Pc. D. Side Panel 1 Pc. E. Middle Panel 1 Pc. I. Shelf 2 Pcs. G.
PAGE 2
Assembly Instructions 2 /4 IMPORTANT * Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Do not tighten up all the bolts until each part is properly assembled. * Use a soft cloth between these parts and the floor. * After assembly item must be level to work properly. Use the included adjustable levelers to level.
PAGE 3
Assembly Instructions 3/4 STEP 2 Attach Middle Panel (E) to Base (B) with Cam Locks. (See Figure 3) B E Figure 3 Cam Lock STEP 3 C Attach Side Panel (C) to unit with Head Cap Bolts. (See Figure 4) F Slide Back Panels (F) into position. F Figure 4 Head Cap Bolt Cam Lock D H STEP 4 Attach Shelf (H) to unit with Cam Locks. Attach Side Panel (D) to unit with Cam Locks and Head Cap Bolts.
PAGE 4
Assembly Instructions 4 /4 STEP 5 G Turn the unit over to its’ upright position. Slide Back Panel (G) into position. Insert Adjustable Pins into side panels and middle panel at the desired level. Place Shelves (I) into position. I I Adjustable Pin STEP 6 Attach Pull Handles to Doors (J) and (K) with Machine Screws. (See Figure 5) Attach Doors (J) and (K) to unit by sliding the door lift hinges into the side panel lift hinges. (See Figure 6) Cam Lock Attach Top (A) to the unit with Cam Locks.