Instructions / Assembly

ManualsBrandsHome Styles ManualsOutdoor Chaise LoungesBiscayne White Patio Chaise Lounge with Green Apple Cushion (Set of 2)

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

88 5552 83

Biscayne Chaise

Head Cap Bolt (large)

6 pcs.(+1 extra)

Head Cap Bolt (round head)

2 pcs.(+1 extra)

Key Wrench

1 pc.

Key Wrench (large)

1 pc.

Bolt

6 pcs.(+1 extra)

Flat Washer (middle)

6 pcs.(+1 extra)

Flat Washer (small)

2 pcs.(+1 extra)

Flat Washer (large)

2 pcs.(+1 extra)

Spring Washer (middle)

6 pcs.(+1 extra)

Spring Washer (small)

2 pcs.(+1 extra)

Spring Washer (large)

2pcs.(+1 extra)

Nut (middle)

6 pcs.(+1 extra)

Nut (small)

2 pcs.(+1 extra)

Nut (large)

2 pcs.(+1 extra)

Nut Cap

6 pcs.(+1 extra)

Wheel Bolt

2 pcs.(+1 extra)

Seat

1 pc.

Arm

1 pc.

Arm

1 pc.

Back Frame

1 pc.

Support

1 pc.

Wheel

2 pcs.

Leg

2 pcs.

Tools required for assembly : Slotted screwdriver

Part List

Hardware List

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Small

Hex Wrench

1 pc.

Large

Hex Wrench

1 pc.

Summary of content (3 pages)

PAGE 1
88 5552 83 Biscayne Chaise IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Seat 1 pc. B. Arm 1 pc. E. Support 1 pc. C. Arm 1 pc. D. Back Frame 1 pc. G. Wheel 2 pcs. F. Leg 2 pcs.
PAGE 2
Assembly Instructions 2/3 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Key Wrenches and Hex Wrench in a safe place as you may need to tighten up the Nuts and Head Cap Bolts in the future. Nut Cap * Use a soft cloth between the parts and the floor. Nut (middle) Spring Washer (middle) Flat Washer (middle) STEP 1 F Insert all Bolts into the pre-drilled holes of Seat (A).
PAGE 3
Assembly Instructions 3/3 Nut (small) Spring Washer (small) Flat Washer (small) D Head Cap Bolt (round head) E Head Cap Bolt (large) STEP 3 Turn the unit to its’ upright position. Place Back Frame (D) into position with Head Cap Bolts (large). Attach Support (E) to Back Frame (D) with Head Cap Bolts (round head), Flat Washers (small), Spring Washers (small) and Nuts.