Instructions / Assembly

Figure 1

IMPORTANT

* Do not tighten up all the screws until each part is properly assembled.

* You should keep Key Wrenches and Hex Wrench in a safe place as you may need to tighten up the Nuts and Head Cap Bolts

in the future.

* Use a soft cloth between the parts and the floor.

Figure 2

Insert all Bolts into the

pre-drilled holes of Seat (A). (See Figure1)

Attach Legs (F) onto Seat (A) with

Flat Washers (middle), Spring Washers (middle),

Nuts (middle) and Nut Caps.

STEP 1

Attach Arms (B) and (C) to

unit with Head Cap Bolts (large).

Attach Wheels (F) to unit with

Flat Washers (large),

Spring Washers (large) and Nuts (large).

(See Figure 2)

STEP 2

Nut Cap

Nut (large)

Wheel Bolt

Nut (middle)

Flat Washer (large)

Flat

Washer (middle)

Spring Washer (large)

Spring

Washer (middle)

Assembly Instructions 2/3

Head Cap Bolt (large)

Large Key Wrench

Nut (large)

Spring Washer (large)

Flat Washer (large)

Wheel Bolt

Plastic Ring is on

outside of wheel