Instructions / Assembly

Assembly Instructions
STEP 1
STEP 2
Figure 1
Figure 2
Figure 3
B
B
B
B
C
C
C
C
A
Nut Cap
Nut
Spring Washer
Flat Washer
Nut Cap
Nut
Spring Washer
Flat Washer
Bolt
Cover
Figure 4
Assemble Legs (B) and Side Frames (C)
with Flat Washers, Spring Washers, Nuts
and Nut Caps. (See Figure 1 )and Figure 2
Insert Bolts into the pre-drilled
holes of Top (A), using a
Slotted Screwdriver.
(See Figure 3)
Attach unit to Top (A)
with Flat Washers,
Spring Washers, Nuts
and Nut Caps.
STEP 3
Turn the table to its’ upright position.
Cover the umbrella hole with Cover.
To level the table, adjust the adjustable
levelers on the bottom of the legs.
(See Figure 4)
IMPORTANT
* Do not use power tools to assemble and do not overtighten the bolts.
* Do not tighten up all the bolts until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.