Instructions / Assembly

Key Wrench
1 pc.
Bolt
4 pcs.(+1 extra)
Flat
Washer
4 pcs.(+1 extra)
Spring
Washer
4 pcs.(+1 extra)
Nut
4 pcs.(+1 extra)
Nut Cap
4 pcs.(+1 extra)
Chair Assembly
Slide Connecter (B) into Base (C)
Place Seat (A) onto unit with Bolts,
Spring Washers, Flat Washers and Nuts.
(See Figure 1)
Tighten all Bolts with Key Wrench.
Cover all Nuts and Bolt heads with Nut Caps
and Bolt Caps.
Place Cushion (D) onto seat.
A.
Seat
1 pc.
B.
Connecter
1 pc.
C.
Base
1 pc.
D.
Cushion
Part List
Hardware List
B
C
Spring Washer
Nut
Nut Cap
Bolt Cap
Bolt Cap
Bolt
Flat Washer
Swivel Arm Chair with Cushion
Bolt Cap
8 pcs.(+1 extra)
Home Styles Consumer Assistance:www.homestyles-furniture.com,
[e-mail], 888-680-7460, 877-831-0319
D
IMPORTANT
* Do not use power tools to assemble and do not over tighten the bolts.
* Do not tighten up all the bolts until each part is properly assembled.
* You should keep Key Wrenches in a safe place as you may need to tighten up
the Nuts and Bolts in the future.
* Use a soft cloth between these part and the floor.
88 5559 53
IMPORTANT NOTE
This product is made of sturdy, high quality aluminum
and will provide years of enjoyment. Do not use power tools
to assemble and only tighten bolts until they are snug.
Over tightening can cause damage to the aluminum.
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this product and
request that you carefully and strictly follow our assembly
instructions to ensure a completed product as it was designed.