Instructions / Assembly

Figure 2
Assembly Instructions 3/3
Turn unit to its’ upright position.
Attach Supports (C) and (B) to unit
with Head Cap Bolts.
STEP 3
STEP 4
Head Cap Bolt
Head Cap Bolt
(long)
Flat Washer
B
C
Place Top (A) upside
down on a soft cloth.
Attach unit to Top (A) with
Head Cap Bolts (long) and Flat Washers.
Turn the table over to its’ upright position.
To level the table, adjust the adjustable
levelers on the bottom of legs.
(See Figure 2)
A
Frozen precipitation may damage the top. Store inside in freezing weather.Note: