Instructions / Assembly

ManualsBrandsHome Styles ManualsOutdoor Dining ChairsMorocco Acacia Wood Swivel Patio Dining Chair (2-Pack)

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Hardware List

Tools required for assembly : Phillips screwdriver

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

Swivel Chair

88 5 8601 1

M6x50

Head Cap Bolt

(50mm)

4pcs.(+1 extra)

Spring Washer

9 pcs.(+1 extra)

Flat Washer

13 pcs.(+1 extra)

Hex Wrench

1 pc.

85M6x

Head Cap Bolt

(85mm)

4 pcs.(+1 extra)

45Mx4

Wood Screw

8 pcs.(+1 extra)

20M6x

Head Cap Bolt

(20mm)

4 pcs.(+1 extra)

Small

Hex Wrench

1 pc.

Seat

1 pc.

Back Frame

.1 pc

Side Stretcher

2 pcs.

Arm

1 pc.

Leg

2 pcs.

Leg

2 pcs.

Arm

1 pc.

Base

1 pc.

Side Stretcher

2 pcs.

M6x40

Head Cap Bolt

(40mm)

7 pcs.(+1 extra)

Summary of content (4 pages)

PAGE 1
88 5601 81 Swivel Chair IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Seat 1 pc. B. Arm 1 pc. C. Arm 1 pc. E. Leg 2 pcs. D. Back Frame 1 pc. G. Side Stretcher 2 pcs. F. Leg 2 pcs. H.
PAGE 2
Assembly Instructions 2/4 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. F E G E STEP 1 G F Attach Stretchers (G) to Legs (E) and (F). Head Cap Bolt (50mm) Figure 1 H H STEP 2 I Attach one leg unit to Base (I) with Head Cap Bolts (50mm). (see Figure 1) Attach Stretchers (H) to base unit. Attach the other leg unit to base unit with Head Cap Bolts (50mm).
PAGE 3
Assembly Instructions 3/4 Wood Screw STEP 3 Turn the base unit upside down. Insert Wood Screws and tighten. (see Figure 2) Figure 2 Head Cap Bolt (85mm) Spring Washer Flat Washer Figure 4 Figure 3 Head Cap Bolt (40mm) Spring Washer Flat Washer C STEP 4 A D Turn Seat (A) upside down. Attach Back Frame (D) to Seat (A) with Flat Washers, Spring Washers, Head Cap Bolts (85mm) and Head Cap Bolt (40mm).
PAGE 4
Assembly Instructions 4/4 Figure 5 STEP 5 Rotate the swivel plate. (see Figure 5) Head Cap Bolt (20mm) Flat Washer Figure 6 STEP 6 Place the base unit onto the top unit and attach it with Flat Washers and Head Cap Bolts (20mm).