Instructions / Assembly

Home Styles Consumer Assistance : www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

Part List

IMPORTANT NOTE

Tools required for assembly : Level

This product is made of sturdy, high quality aluminum

and will provide years of enjoyment. Do not use power tools

to assemble and only tighten bolts until they are snug.

Over tightening can cause damage to the aluminum.

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occurring to the parts.

We have taken great care in the design of this product and

request that you carefully and strictly follow our assembly

instructions to ensure a completed product as it was designed.

88 5701 30

Dining Table

Top

1 pc.

Leg

4 pcs.

Hex Wrench

1 pc.

Spring Washer

16 pcs. (+1 extra)

Flat Washer

16 pcs. (+1 extra)

Cover

1 pc.

Stretcher

1 pc.

M6x20

Head Cap Bolt

16 pcs. (+1 extra)

PAGE 1
88 5701 30 Dining Table IMPORTANT NOTE. This product is made of sturdy, high quality aluminum and will provide years of enjoyment. Do not use power tools to assemble and only tighten bolts until they are snug. Over tightening can cause damage to the aluminum. Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts.
PAGE 2
Assembly Instructions 2/2 IMPORTANT * Please keep Hex Wrench in a safe place as you may need to tighten up the Nuts in the future. * Use a soft cloth between these parts and the floor. * Do not use power tools to assemble and do not over tighten the bolts and nuts. * Do not tighten all the bolts and nuts until each part is properly assembled. * After assembly, item must be level to work properly. Use the included adjustable levelers to level.