Instructions / Assembly

ManualsBrandsHome Styles ManualsOutdoor Bar FurnitureBali Hai Outdoor Patio Tiki Bar and 2-Stools

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Part List

88 5662 98

Tiki Bar

Roof

1 Pc.

Stretcher

2 Pcs.

Rack

1 Pc.

Shelf

1 Pc.

Shelf

4 Pcs.

Base

1 Pc.

Post

2 Pcs.

Post

2 Pcs.

Middle Panel

1 Pc.

Back Panel

1 Pc.

Back Panel

1 Pc.

Back Panel

1 Pc.

Post

2 Pcs.

Top

1 Pc.

Side Panel

1 Pc.

Side Panel

1 Pc.

Apron Base

1 Pc.

Leg

4 Pcs.

Connector

6 Pcs.

Hardware List

M6x50

Head Cap Bolt

2 Pcs. (+1 extra)

M8x25

Wood Screw (short)

8 Pcs. (+1 extra)

M7x40

Head Cap Screw

19 Pcs. (+1 extra)

M8x32

Wood Screw (middle)

28 Pcs. (+1 extra)

M8x38

Wood Screw (long)

12 Pcs. (+1 extra)

Adjustable Pin

16 Pcs. (+1 extra)

Flat Washer

2 Pcs. (+1 extra)

Nut (short)

2 Pcs. (+1 extra)

Nut (long)

4 Pcs. (+1 extra)

Bolt

4 Pcs. (+1 extra)

Wing Washer

4 Pcs. (+1 extra)

Hex Wrench

1 Pc

Small Hex Wrench

1 Pc

Wrench

1 Pc

Wrench

1 Pc

M6x16

Wood Screw (small)

2Pcs. (+1 extra)

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level

Summary of content (5 pages)

PAGE 1
88 5662 98 Tiki Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List B. Stretcher 2 Pcs. A. Roof 1 Pc. F. Shelf 1 Pc. C. Rack 1 Pc. D. Post 2 Pcs. E. Top 1 Pc. G. Shelf 4 Pcs. J. Side Panel 1 Pc.
PAGE 2
Assembly Instructions 2 /5 IMPORTANT * Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Do not tighten up all the Screws until each part is properly assembled. * Use a soft cloth between these parts and the floor. * After assembly item must be level to work properly. Use the included adjustable levelers to level. STEP 1 Wood Screw (long) Place Top (E) upside down on a soft cloth. S Attach Connectors (S) to Top (E) with Wood Screws (long).
PAGE 3
Assembly Instructions 3/5 STEP 4 Attach Connectors (S) to unit with Wood Screws (middle). Attach Shelf (F) to unit. F S S Wood Screw (middle) STEP 5 K Attach Side Panel (K) unit to unit with Bolts, Wing Washers and Nuts (long). N Attach Middle Panel (N) to unit. Bolt Nut (long) Wing Washer Hex Wrench STEP 6 Head Cap Screw H R Attach Legs (R) to Base (H) with Head Cap Screws. Attach Apron Base (I) to unit with Wood Screws (middle).
PAGE 4
Assembly Instructions 4/5 STEP 8 Turn unit to its’ upright position. Attach Top (E) to unit with Wood Screws (middle) and Wood Screws (long). E Wood Screw (middle) Wood Screw (long) Insert Adjustable Pins into side panels and middle panel at the desired level. Place Shelves (G) into position. G G G G Adjustable Pin STEP 9 Attach Posts (D) to Rack (C) with Head Cap Screws. Attach Stretchers (B) to unit with Flat Washers and Nuts (short).
PAGE 5
Assembly Instructions 5/5 STEP 10 Wood Screw (short) Attach Roof (A) to roof unit with Wood Screws (short). A STEP 11 Slide roof unit posts through the base unit top and attach with Head Cap Screws and Head Cap Bolts. (See Figure 4) Level the unit by adjusting the adjustable levelers on the bottom of the legs.