Instructions / Assembly

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Tools required for assembly : Phillips screwdriver

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occurring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Hardware List

Hex Wrench

1 pc.

M8x15

Head Cap Bolt

16 pcs. (+1 extra)

88 5670 34

Round Dining Table

Small

Hex Wrench

1 pc.

Leg

4 pcs.

Stretcher

1 pc.

Top

1 pc.

Top

tretcher

pc.

Top Frame

1 pc.

PAGE 1
88 5670 34 Round Dining Table IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List C. Stretcher 1 pc. A. Top 1 pc. D. D Leg L 4 pcs. B. Top Frame 1 pc. Hardware List Hex Wrench 1 pc.
PAGE 2
Assembly Instruction 2 / 2 IMPORTANT * Do not tighten up all the bolts until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Use a soft cloth between these parts and the floor. STEP 1 Head Cap Bolt Attach Legs (D) to Stretcher (C) with Head Cap Bolts. (see Figure 1) C D D D D Figure 1 Head Cap Bolt STEP 2 Attach unit to Top Frame (B) with Head Cap Bolts.