Use and Care Manual

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Part List

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

88 5804 20

End Table

Tools recommended for assembly : Level

Key Wrench

1 Pc.

Flat Washer

8 Pcs. (+1 extra)

Cap

8 Pcs. (+1 extra)

Spring Washer

8 Pcs. (+1 extra)

M6x18

Botl

8 Pcs. (+1 extra)

Top Frame

1 Pc.

Base

1 Pc.

Side Frame

2 Pcs.

Glass Top

1 Pc.

PAGE 1
88 5804 20 End Table IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List B. Glass Top 1 Pc. A. Top Frame 1 Pc. C. Base 1 Pc. D. Side Frame 2 Pcs. Hardware List Key Wrench 1 Pc. Spring Washer 8 Pcs.
PAGE 2
Assembly Instructions 2 /2 IMPORTANT * Please keep Key Wrench in a safe place as you may need to tighten up the Bolts in the future. * Do not tighten up all the bolts until each part is properly assembled. * Use a soft cloth between these parts and the floor. * After assembly item must be level to work properly. Use the included adjustable levelers to level. STEP 1 A Attach Top Frame (A) and Base (C) to Side Frame (D) with Flat Washers, Spring Washers, Bolts and Caps.