Installation Guide

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Part List

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

88 5804 80

Lounge Chair

Tools recommended for assembly : Level

Key Wrench

1 Pc.

Flat Washer

14 Pcs. (+1 extra)

Cap

14 Pcs. (+1 extra)

Spring Washer

14 Pcs. (+1 extra)

M6x18

Botl (short)

6 Pcs. (+1 extra)

M6x30

Botl (long)

8 Pcs. (+1 extra)

Back Cushion

1 Pc.

Side Frame

1 Pc.

Side Frame

1 Pc.

Back Frame

1 Pc.

Seat Frame

1 Pc.

Stretcher

1 Pc.

Seat Cushion

1 Pc.

PAGE 1
88 5804 80 Lounge Chair IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Seat Cushion 1 Pc. C. Side Frame 1 Pc. B. Back Cushion 1 Pc. F. Back Frame 1 Pc. D. Side Frame 1 Pc. E. Stretcher 1 Pc.
PAGE 2
Assembly Instructions 2 /3 IMPORTANT * Please keep Key Wrench in a safe place as you may need to tighten up the Bolts in the future. * Do not tighten up all the bolts until each part is properly assembled. * Use a soft cloth between these parts and the floor. * After assembly item must be level to work properly. Use the included adjustable levelers to level.
PAGE 3
Assembly Instructions 3/3 STEP 3 Attach Side Frame (D) to unit with Flat Washers, Spring Washers, Bolts (long), Bolts (short) and Caps. Cap Bolt (long) Cap Bolt (short) Spring Washer Flat Washer D Flat Washer Spring Washer STEP 4 Turn the unit to its’ upright position. Place Seat Cushion (A) and then Back Cushion (B) onto unit. B To level the unit, adjust the adjustable levelers on bottom of unit.