Instructions / Assembly

ManualsBrandsHome Styles ManualsDining & Kitchen Furniture34"H x 28-1/2"W x 18"D Kitchen Cart with Solid Wood Top - Natural Finish

PART LIST

Round Arms

1 pc.

HARDWARE LIST

Head Cap Bolt

16 pcs.(+1 extra)

Hex Wrench

1 pc.

Machine Screw

for Pull Handle

6 pcs.

Wood Screw

(for caster)

16 pcs. (+1 extra)

Side Frame L.

.1 pc

Side Frame R.

1 pc.

Pull Handle

3 pcs.

Top

1 pc.

Base Panel

1 pc.

Front Rail

1 pc.

Back Panel

2 pcs.

Upper

Back Stretcher

1 pc.

Lower

Back Stretcher

1 pc.

Middle

Back Stretcher

1 pc.

Adjustable Shelf

1 pc.

Handle Arms

2 pcs.

Wood Plug

6 pcs.(+1 extra)

88 5040 95C

Kitchen Cart with one Drawer,

two Doors and Adjustable Shelf

Adjustable Pin

4 pcs.(+1 extra)

Wood Screw 6 x 1

Long (for Drawer)

”

8 pcs.(+1 extra)

Caster

2 with brake and

2 without brake

4 pcs.

Door

2 pcs.

Drawer

(Knock-Down Construction, please

refer how to assemble the drawer

on the last page of this assembly

instructions).

1 pc.

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Tools Required For Assembly : Phillips screwdriver

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

Summary of content (4 pages)

PAGE 1
88 5040 95C Kitchen Cart with one Drawer, two Doors and Adjustable Shelf IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. PART LIST C. Side Frame R. 1 pc. A. Top 1 pc. F. Base Panel 1 pc. J.
PAGE 2
Assembly Instructions 2/4 IMPORTANT Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future. STEP 1 Attach 4 Casters to the under side of the Base Panel (F) with Wood Screws (I), put the 2 Casters with brakes in front as you first need to lock the cart from moving. STEP 2 F D Attach the Side Frame L (B) to the Base Panel (F) with Head Cap Bolts.
PAGE 3
Assembly Instructions 3/4 STEP 4 A Attach the Top (A) to the Assembled Unit, tighten all the Head Cap Bolts through the Side Frame (B) and (C). B Top Assembly C STEP 5 Attach the Doors (O) to the Assembled Unit. Assemble the Door Pull Handles using the Machine Screws. Insert the Adjustable Pins into the Side Panel, in the desired level. Place Adjustable Shelf (M) and Slide the Drawer (L) in place.
PAGE 4
Assembly Instructions 4/4 Drawer L1 L4 (Fig) 1 (Fig)1 L3 MAKE SURE ROLLER IS ON THE BACK Line up Side Parts (L3) and (L4) to the Front Part (L1). Be sure to follow the Arrow sign sticker on the parts. Using a Philips screw driver, insert 1” screws (II) into each of the 4 pre-drilled holes in sides (L3) and (L4), then tighten half way. L3 (Fig) 2 Turn the assembled drawer over and slide the Plywood Bottom Part (L5) into the grooves on Side Parts (L1), (L3) and (L4).