How to Guide

ManualsBrandsHome Styles ManualsKitchen Islands & Carts9001-0027G

PART LIST

88 9001 006C

Cuisine Cart

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Back Piece

1 pc.

Back Panel

2 pcs.

Back

Stretcher

1 pc.

Front Rail

1 pc.

HARDWARE LIST

Side Panel

1 pc.

Side Panel

1 pc.

Base

1 pc.

Shelf

1 pc.

Drawer

1 pc.

Head Cap Bolt (Middle)

for top

4 pcs.(+ 1 extra)

Head Cap Bolt

(long)

12 pcs.(+ 1 extra)

Head Cap Bolt (short)

for Side Towel Bar

2 pcs.

(+ 1 extra)

Hex Wrench

1 pc.

Pull Handle

2 pcs.

Machine Screw

for Pull Handle

4 pcs.

Wood Screw

16 pcs.

(+ 1 extra)

Adjustable Pin

4 pcs. (+ 1 extra)

Side Rack

1 pc.

Side Rack

1 pc.

Brush Chrome Pipes

3 pcs.

Base Rack

1 pc.

Side Towel Bar

1 pc.

Door.

1 pc.

Door.

1 pc.

Caster

two lock

two non-lock

4 pcs.

Wood Plug

8 pcs.

(+2 extra)

Tools Required For Assembly : Phillips screwdriver

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

Small

Hex Wrench

1 pc.

Revised date : 24Mar2011

Summary of content (5 pages)

PAGE 1
88 9001 006C Cuisine Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. PART LIST B. Side Panel 1 pc. A. Side Panel 1 pc. C. Base 1 pc. D. Back Piece 1 pc. F. Back Stretcher 1 pc. G. Front Rail 1 pc. L.
PAGE 2
Assembly Instructions 2/4 IMPORTANT Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future. STEP 1 Wood Screw Attach four Casters to the underneath of the Base (C). C Locking Caster Locking Caster STEP 2 D Attach the Side Panel (B) to the Base (C). Tighten up the Head Cap Bolts. B Attach the Back Piece (D) on the Base rear. C Tighten Head Cap Bolt by Hex Wrench.
PAGE 3
Assembly Instructions 3/4 F Head Cap Bolt STEP 3 E E A G Slide the Back Panel (E) in place. Attach the Back Stretcher (F) on the unit with the Head Cap Bolt. B Attach the Front Rail (G) to the Side Panel (B) with Head Cap Bolt. Attach the Side Panel (A) to the unit with Head Cap Bolts. Head Cap Bolt J Head Cap Bolt STEP 4 Attach the Side Rack (H) to the Side Panel (A) with the Head Cap Bolts. A Attach the Brush Chrome Pipes (J) to the pre-drilled holes of Side Rack (H).
PAGE 4
Assembly Instructions 4/4 STEP 6 Now, you’ll be able to create your own kitchen cart. Make your own choice of the ‘Top’, wood or stainless steel or granite. Head Cap Bolt (for Top) Place the Top on the unit, then tighten the Head Cap Bolts. Insert the Adjustable Pins into both side panels at the desired level. Head Cap Bolt (for Top) Place Shelf (M) into place. Adjustable pin M STEP 7 Attach the Pull Handles to the Door (N) and (O) using the Machine Screws.
PAGE 5
88 9001 006C Drawer (P) * If you are missing any of these parts, please contact our DMI Customer Service Department at 1-877-831-0319 or fax us at 1-800-755-2878. Unit Part List HARDWARE LIST P4. Side Part 1 pc. P1. Front Part 1 pc. Pull Handle 1 pc. Wood Screw (for Base) 6 pcs.(+1 extra) Machine Screw for Pull Handle 2 pc. Wood Screw (for Side Part) 8 pcs.(+1 extra) P3. Side Part 1 pc. P2. Back Part 1 pc. P5. Base 1 pc.