Use and Care Manual

ManualsBrandsHome Styles ManualsCarts, Islands & Utility TablesCuisine Cart Warm Oak Kitchen Cart With Quartz Top

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Part List

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

88 9001 006C

Cuisine Cart

(Please refer to the last page of these

instruction for drawer assembly steps)

Tools required for assembly : Phillips screwdriver

Hex Wrench

1 Pc.

M6x30

Head Cap Bolt(Middle)

for Top

4 Pcs. (+1 extra)

M6x35

Head Cap Bolt(long)

12 Pcs. (+1 extra)

M6x25

Head Cap Bolt

for Side Tower Bar

2 Pcs. (+1 extra)

Wood Plug

8 Pcs. (+1 extra)

Adjustable Pin

4 Pcs. (+1 extra)

M4x16

Wood Screw

for Caster

16 Pcs. (+1 extra)

Small Hex Wrench

1 Pc.

Caster

two lock

two non-lock

4 Pcs.

Base

1 Pc.

Side Panel

1 Pc.

Side Rack

1 Pc.

Side Rack

1 Pc.

Base Rack

1 Pc.

Drawer

1 Pc.

Door

1 Pc.

Door

1 Pc.

Shelf

1 Pc.

Side Tower Bar

1 Pc.

Side Panel

1 Pc.

Back Stretcher

1 Pc.

Front Rail

1 Pc.

Back Upright

1 Pc.

Back Panel

2 Pcs.

Brush Chrome Pipes

3 Pcs.

Knob

2 Pcs.

M4x20

Machine Screw

for Knob

2 Pcs.

Summary of content (5 pages)

PAGE 1
88 9001 006C Cuisine Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List F. Back Stretcher 1 Pc. C. Base 1 Pc. A. Side Panel 1 Pc. H. Side Rack 1 Pc. B. Side Panel 1 Pc. J.
PAGE 2
Assembly Instructions 2 /5 IMPORTANT * Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Do not tighten up all the bolts until each part is properly assembled. Wood Screw for Caster * Use a soft cloth between these parts and the floor. STEP 1 Non-Locking Caster Attach Casters to Base (C) with Wood Screws for Caster.
PAGE 3
Assembly Instructions 3/5 STEP 3 Head Cap Bolt Attach Side Rack (H) to Side Panel (A) with Head Cap Bolts. Attach Brush Chrome Pipes (J) and Base Rack (K) to Side Rack (H). H Attach Side Rack (I) to Side Panel (A) with Head Cap Bolts. A K I J Head Cap Bolt for Side Tower Bar B L STEP 4 Attach Side Tower Bar (L) to Side Panel (B) with Head Cap Bolts for Side Tower Bar.
PAGE 4
Assembly Instructions 4/5 STEP 5 Now, you’ll be able to create your own kitchen cart. Make your own choice the ‘Top’, wood or stainless steel or granite. Head Cap Bolt for Top Place the Top onto the unit with Head Cap Bolts for Top. Insert Adjustable Pins into the Side Panels at the desired level. Adjustable Pin Place Shelf (M) into position. M STEP 6 Attach Knobs to Door (N) and (O) with Machine Screws.
PAGE 5
Assembly Instructions 5/5 Drawer (P) Figure 1 P4 P1 STEP 1 P2 P3 Attach P1, P2 and P3 using a Phillips Screwdriver and long Wood Screws (4X), tighten halfway. MAKE SURE ROLLER IS ON THE BACK Attach P1, P2 and P4 using long Wood Screws (4X), tighten halfway. (See ﬁgure 1) STEP 2 Slide P5 into grooves in P3 and P4.