How to Guide

Assembly
Instructions
Unit Part List
V3.
Side Part
1 pc.
V4.
Side Part
1 pc.
V5.
Base Part
1 pc.
V2.
Back Part
1 pc.
V2
V2
V5
V5
V3
V4
V4
V4
V3
V3
V1
V1
V1
(Fig) 2
(Fig) 3
(Fig) 4
Assemble the Pull Handle
with Machine Screw on
the Front Part(V1).
(Fig)1
(Fig)2
(Fig)3
(Fig)4
Turn the assembled drawer over and slide the
Plywood Base Part (V5) into the grooves
on Side Parts (V3) and (V4). Be sure to push
the plywood all the way forward so it meets the
Front Part (V1).
HARDWARE LIST
Pull Handle
1 pc.
Machine Screw
for Pull Handle
2 pcs.
1
Wood Screw /”
2
(for Bottom Part)
6 pcs.(+1 Extra)
Wood Screw 1”
(for Side Part)
8 pcs.(+1 Extra)
(Fig) 1
Insert the remaining (6) 1/2” screws
into the pre-drilled holes in Base Part
(V5), then tighten all screws
MAKE SURE ROLLER
IS ON THE BACK
* If you are missing any of these
parts, please contact our DMI
Customer Service Department
at 1-877-831-0319 or fax us at
1-800-755-2878.
V1.
Front Part
1 pc.
Assemble the Front Part (V1), Side Part (V3),
(V4) and Back Part (V2).
Using a Philips screw driver, insert 1” screws
into each of the 4 pre-drilled holes Side Part
of the (V3) and (V4), then tighten half way.
88 9100 001 C
Drawer (V)