How to Guide

ManualsBrandsHome Styles ManualsKitchen Islands & Carts9200-1014

Head Cap Bolt

11 pcs. (+1extra)

Hex Wrench

1 pc.

Pull Handle

4 pcs.

Machine Screw

for Pull Handle

8 pcs.

Wood Screw

for Caster

16 pcs. (+2 extra)

Adjustable Pin

12 pcs. (+2extra)

Head Cap Bolt (short)

for Side Towel Bar

2 pcs. (+1 extra)

Head Cap Bolt

(short) for Top

4 pcs. (+1 extra)

Wood Plug

8 pcs.

(+2 extra)

Caster

two lock

two non-lock

4 pcs.

Steel Plate

Connector

for Top

4 pcs.

Flat

Washer

for Top

4 pcs. (+1 extra)

Spring

Washer

for Top

4 pcs. (+1 extra)

88 9200 002C

Kitchen Cart

PART LIST

Side Panel

1 pc.

Middle Panel

2 pcs.

Back Panel

2 pcs.

Back Panel

1 pc.

Back Piece

2 pcs.

Back Stretcher

1 pc.

Front

Stretcher

1 pc.

Base

1 pc.

Door

.2 pcs

Door

2 pcs.

(For Drawer N, packed in separate carton

with hardware and assembly instructions.)

Adj. Shelf

2 pcs.

Adj. Shelf

1 pc.

HARDWARE LIST

Side Panel

1 pc.

Drawer

Divider

1 pc.

KD. Drawer

2 pcs.

Towel Bar

1 pc.

Side Rack

1 pc.

Side Rack

1 pc.

Base Rack

1 pc.

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Tools required for assembly : Phillips screwdriver

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

servicedesk@homestyles-furniture.com

Small

Hex Wrench

1 pc.

Revised date : 30Oct2012

Brush Chrome Pipes

3 pcs.

Summary of content (5 pages)

PAGE 1
88 9200 002C Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. PART LIST C. Middle Panel 2 pcs. B. Side Panel 1 pc. H. Back Stretcher 1 pc. E. Back Panel 2 pcs. I. Front Stretcher 1 pc. J.
PAGE 2
Assembly Instructions 2/3 IMPORTANT Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future. STEP 1 Attach four Casters to the Base (J) with Wood Screws. G (See the ‘Arrow’ sticker indicating front area on the base.) G C STEP 2 C Attach the Side Panel (D) to the Base (J). D J Tighten Head Cap Bolt only half way.
PAGE 3
Assembly Instructions 3/3 Head Cap Bolt STEP 4 Attach the Side Rack (R) to the Side Panel (B) with the Head Cap Bolt. B Attach the Brush Chrome Pipes (U) to the pre-drilled holes of Side Rack (R). R Attach the Base Rack (T) to the Side Rack (R). T S Attach the Side Rack (S) to the Side Panel (B), using Head Cap Bolt. U STEP 5 Install the Doors (K) and (L), using Spring Pin Hinge. (See figure 1) Assemble the Door Pull Handles, using the Machine Screws.
PAGE 4
N3 N2 N5 N4 N1 Drawer (N) UNIT PART LIST HARDWARE LIST N4. Side Part 2 pcs. N1. Front Part 2 pcs. N2. Back Part 2 pcs. 1 Wood Screw /2 ” (for Bottom Part) 12 pcs. Pull Handle 2 pcs. N5. Bottom 2 pcs. N3. Side Part 2 pcs. Wood Screw 1” (for Side Part) 16 pcs. Machine Screw for Pull Handle 4 pcs. Assembly Instructions Figure 1 N1 N4 Line up Side Parts (N3) and (N4) to the Front Part (N1) and Back Part (N2). Be sure to follow the ‘Arrow’ sign sticker on the parts.
PAGE 5
PART LIST HARDWARE LIST W. Top 1 pcs. X. Top Support 2 pcs. Attention ! This Top can be used for both kitchen cart 9100 series and 9200 series. Head Cap Bolt 6 pcs. (+1 extra) The Top Support (part X) and Head Cap Bolts are particular parts required for 9100 series only, they are not necessary for 9200 series.