User's Manual

27
Charger Wall Mounting Instructions
Use the template at the end of this manual to help position the charging cradle on
the wall.
Procedure
1. Locate a wall stud in the area where you want to mount the handset
charging cradle.
2. Hold the template against the wall with the crossmarks centered on the
stud and mark through the center of each crossmark with a pencil or other
sharp-pointed object.
3. Insert the mounting screws through the wallboard and into the stud at the
marked locations. Leave enough of the screw protruding to hold the
charging cradle.
4. Connect the handset AC adaptor to the charging cradle and route the
adaptor cord through the channel in the base.
5. Position the charging cradle against the wall so the mounting screws align
with the holes on the underside of the unit.
6. Slide the charging cradle down until it seats firmly on the mounting screws.
See the following illustration.
Wall Mounting Instructions