User Manual

11
Adding Computers To
The Network
To add a computer to your AirWay network, you must complete the
following steps:
1. Install network card (PCI or PCMCIA)
2. Install TransPort drivers and software
Note:
You may be asked for your Windows CD-ROM during
software installation. To prevent software conflicts, be sure to
use the same version of Windows that is currently installed on
your computer.
Installing Network Cards
Installing a PCI card
Use the following procedure to install a PCI card in a desktop
computer.
1. Turn off and unplug your PC.
2. Remove the PC case, then remove the slot cover from an
empty PCI slot.
3. Insert the AirWay PCI card into the expansion slot, making
sure that it is fully seated in the slot. Secure the card in place
using the screw removed in the previous step.
4. Replace the PC case.
5. Connect the AirWay external antenna to the PCI card.
6. Plug in the computer and turn it on.