Quick Start Guide

What’s inside:

Smart Garage

Ultra-Secure Starter Kit

Quickstart Guide

What you’ll need:

1x Mini Cube HD camera1x Security Shuttle 1x Garage door control button

1x Ethernet cable

3x Power adapters

3x Power cables

Mounting accessories

and double-sided tape

2x U-fork wires

2x 18-gauge wires

• Broadband Internet • iPhone or Android phone

• Phillips screwdriver • Home router

• Existing powered garage door

opener

Model No. H13012US

PAGE 1
Smart Garage Ultra-Secure Starter Kit Quickstart Guide What’s inside: 1x Security Shuttle Model No.
PAGE 2
Step 1: Assemble your hardware Unpack all of your hardware within 1-10 feet of your home router. • Connect Security Shuttle to your DHCP-enabled router with the included Ethernet cable • Connect Security Shuttle, Mini Cube HD camera, and garage door control button to their individual power adapters and plug them in Step 2: Set up your smartphone Your phone will disrupt the setup process if it goes to sleep. So before you register your devices, disable the autolock feature on your smartphone.
PAGE 3
Option 3: Attach it to your garage door motor 11 Attached to motor 2 • Access the wire panel on your garage door motor unit • Locate the two wires that connect to your garage door wall switch. If you have trouble finding them, please refer to the user manual of your garage door motor to determine which wires connect to your wall switch. Or give us a call, we’ll be happy to help.
PAGE 4
Troubleshooting Tips Are your devices listed in your app? If you’re having trouble installing your devices, see if they’re listed in your Home8 app: • Navigate to > Device Management to see if all your devices are listed • Tap + next to the device category and follow the on-screen instructions to add any missing devices Are your devices communicating with Security Shuttle? • If your devices don’t connect to Security Shuttle, they might be too far away.