Quick Start Guide

Step 4: Connect and mount your garage door control button
Step 5: Test your garage door opener
Insert wires and power
Attached to motor Wire to garage door motor
Option 3: Attach it to your garage door motor
1
1
2
• Access the wire panel on your garage door motor unit
• Locate the two wires that connect to your garage door
wall switch. If you have trouble finding them, please
refer to the user manual of your garage door motor to
determine which wires connect to your wall switch. Or
give us a call, we’ll be happy to help.
1. Insert the loose wires into the bottom of your Home8 garage door control
button (one per hole, the order doesn’t matter)
2. Plug in your Home8 garage door control button with the included power
cable and adapter, then mount your control button with screws or
double-sided tape
In the Home8 app, navigate to Automation > Garage Door Opener and press the red power button.
Your app should now be able to operate your garage door.
Step 6: Mount your devices
Before you mount your sensor, see if they’re within Security Shuttle’s range.
• Take your sensors to the rooms you want to use them in
• Open the battery cover of each device you want to install
If you get a notification that says your device has been tampered with, it’s within range. Replace the battery
cover and mount the device with the included screws or double-sided tape.
• Depending on your motor, use U-fork wires or straight wires to connect your new garage door control button to
your garage door motor
• Continue to step 4