Operation Manual

23
5.2 Installation
5.2.1 Dish
1. Press the Menu button to display the main menu.
2. Press the button on the sub menu. The
password pop-up window appears. All sub menus
such as Dish, Auto Scan, Manual Scan, and
Transponder Edit on the Installation are locked by
password. The default password is “ 0000” .
1. Use the ▲/▼ button, you can move upwards
and downwards in this mode. In any item, such
as Dish, Satellite, Transponder, etc. if you want to
check the detail view, use the ◀/▶ button.
1. Press the ◀/▶ button, the right screen shows
the pre-selected 32 satellite lists.
2. Select the desired satellite, and press the
button. Then satellite column changed by the
desired satellite name.
3. If you can’t find the desired satellite, select any
satellite and press the button.
1. Press the ◀/▶ button to watch the satellite in
the pre-programmed lists. Press the button
to replace the current satellite with the selected
satellite.