Operation Manual

24
1. Press the ◀/▶ button, the right screen shows
the transponder lists.
2. Press the button to select other transponder.
If you select one of the alternative satellite
names, the transponder list is changed
automatically according to the selected satellite
name.
1. Select one of the LNB Power types using the ◀/
▶ button. You can select LNB Power value as
13/18V normally or if the distance between
antenna and receiver is further than 60m, you
can select LNB Power value as 14/19V.
1. Select the LNB Type value. If you have selected
User Single or User Dual, enter LNB frequency
value directly, and press the button. If you
select LNB Type value as 9750/10600,
9750/10750 or User Dual, 22KHz value is fixed to
auto mode, in other case you can select a value
depending on usage of 22KHz tone switch box.
1. Select Switch Type if used.
2. If you use a DiSEqC 1.0 switch, select DiSEqC on
the Switch Type.
3. Select one of the DiSEqC inputs from the Option.