User Manual

Power On / Off and Mist Adjustment

Plug the power cord into a wall socket. Now the humidier is ready for use.

1. Rotate the control knob clockwise to the ON position. The white LED indicator will light up

indicating the humidier has been turned on to a minimum mist level.

2. Keep rotating the control knob clockwise to increase the mist level.

3. Rotate the control knob counterclockwise to the OFF position to turn off the humidier. The

LED indicator will turn off. The fan will work for another 3 minutes to dry the mist tube.

The most comfortable environmental humidity is between 40%-60%. Please adjust the mist

as needed.

Low Water Protection: Auto Shut-off the Humidier

When there is not enough water inside the water reservoir, the humidier will stop misting and

the LED indicator will become red. It is designed for safety to prevent the humidier from

possibly overheating and damaging the atomizer.

CLEANING AND MAINTENANCE

Caution

1. DO NOT submerge the base in water.

2. Make sure water does not enter the base through the air outlet, air inlet,

or the control knob.

3. DO NOT wash any part of this humidier in dish washer which will

damage the humidier and void the warranty.

Daily Maintenance

Turn off the humidier, unplug it from the power source. Drain water from the tank, reservoir

and base.

Weekly Maintenance

1. To properly clean your humidier, we recommend you to remove scale and disinfect the

humidier separately.

2. DO NOT mix vinegar and bleach solutions together. Do not use more than 1 tsp. of

bleach per gallon of water to avoid damaging your humidier.

3. Please make sure the sealing ring on the tank cap is installed properly after cleaning to

avoid water leakage.

1 2

Scale Removal Instructions