User Manual

QUICK START GUIDE

READ AND SAVE THESE INSTRUCTIONS

BEFORE TURNING THE UNIT ON

• Take the air purifier out of the box and remove the clear protective plastic bag.

• Place the air purifier on a firm level surface.

• Locate the Carbon Odor Filter inside the box and remove the protective plastic bag.

• Install the Carbon Odor Filter and make sure the True HEPA Filter is firmly in place.

1. Open the back grille by pulling the tabs

on both sides of the grille cover

3. The top of the Carbon Odor Filter has 2

slots for installation. Hang the Carbon

Odor Filter on the top tabs and secure

under the bottom tabs.

2. Open the cover outward until the bottom

grille cover tabs slide away from the unit.

QS-AP25A

MADE IN CHINA

5. Place the bottom grille cover tabs back

into the base. Gently push the grille

cover until the top tabs snap back into

place

4. The True HEPA Filter will be resting

inside the unit. Make sure the filter is

firmly seated inside the unit with the Air

Flow arrows pointing toward the inside

of the air purifier.

POWER ON/OFF

Plug unit in to a 120 volt AC electrical outlet. Press the Power Button to turn the air purifier on. Press the Power Button a second

time to activate Night Mode and turn off the display lights. Press the Power Button a third time to turn the unit off.

PAGE 1
READ AND SAVE THESE INSTRUCTIONS QUICK START GUIDE BEFORE TURNING THE UNIT ON • Take the air purifier out of the box and remove the clear protective plastic bag. • Place the air purifier on a firm level surface. • Locate the Carbon Odor Filter inside the box and remove the protective plastic bag. • Install the Carbon Odor Filter and make sure the True HEPA Filter is firmly in place. 1. Open the back grille by pulling the tabs on both sides of the grille cover 2.
PAGE 2
GUIDE DE DÉMARRAGE RAPIDE LIRE ET CONSERVER CES INSTRUCTIONS AVANT DE METTRE L’APPAREIL EN MARCHE • Retirer le purificateur d’air de la boîte et enlever le sac de protection en plastique transparent. • Placer le purificateur d’air sur une surface ferme et horizontale. • Localiser le filtre à charbon anti-odeurs dans la boîte et enlever le sac de protection en plastique. • Installer le filtre à charbon anti-odeurs et s’assurer que le filtre True HEPA est bien positionné. 1.
PAGE 3
LEA Y GUARDE ESTAS INSTRUCCIONES GUÍA DE INICIO RÁPIDO ANTES DE ENCENDER LA UNIDAD • Saque el purificador de aire de la caja y retire la bolsa plástica transparente protectora. • Ponga el purificador de aire sobre una superficie firme y a nivel. • Ubique el filtro de carbón para olores dentro de la caja y retire la bolsa plástica protectora. • Instale el filtro de carbón para olores y asegúrese de que el filtro True HEPA esté firme en su lugar. 1.