Operation Manual

6
GB
Changing the Image Disc
1. Make sure projection is off, then slide down the projector door and pull out the disc
holder (Fig 7).
2. Gently remove the current disc and set aside (Fig 7).
3. Select a new disc from the disc storage slots (Fig 6) and place into the disc holder
so that you can see the word “UP” printed on the disc (Fig 8).
4. Slide the disc holder back into the unit and push projector door up to close (Fig 6).
NOTE: The projector door must be completely closed, pushed all the way up, in
order for the picture projector to function (Fig 6).
5. Put original image disc into empty disc storage slot (Fig 6).
PROJECTION LENS
IMAGE
DISC
DISC HOLDER
PROJECTOR
DOOR
DISC STORAGE SLOTS
IMAGE
DISC
“UP”
DISC HOLDER
PROJECTOR
DOOR
FIGURE 7 FIGURE 8
SS-3000-2EU_IB.qxd:Layout 1 23/7/09 14:35 Page 6