User Guide

P/N 19056
INSTRUCTION SHEET
FOR
BLOWER/VAC HIGH PERFORMANCE KIT A-06308
MODELS Affected: HB-180 / HB-180V / HB-390 / HB-390V
NOTE: CLEAN AREAS THOROUGHLY WHERE DECALS ARE BEING APPLIED.
3. Align Red Decal with the Lower Edge of the Hanger Notch
and apply. Position Sight Marks of decal along volute seam
next to Air Filter.
FIGURE 4
2. Remove original WARNING Decal from housing
underneath the handle. Position New Long
WARNING Decal as shown in Figure 2. Align
Sight Marks on each end of the decal to the seam
as shown. Center lengthwise beneath the handle.
FIGURE 2
FIGURE 1
FIGURE 3
1. Measure up 1/2" from bottom of shown in
Figure 1. Apply new (Black) HOMELITE Decal
over seam as shown.
(BLACK)
HOMELITE Decal
Red Decal
Sight Marks
Air Filter
Lower Edge of
Hanger Notch
4. Fold Red Decal as shown in Figure 4.
Fold as shown
Sight Marks
Sight Marks
New Long
WARNING Decal
Sight
Marks
1/2"
from
bottom.
WARNING