MSDS

MSDS- Page 5of 8
RJS STANDARDS TESTING & CERTIFICATION CENTER
141-04 14th Avenue, Whitestone, New York 11357, USA.
Personal Protective Equipment (In the Event of Battery Case Breakage):
Hand protection: Rubber or neoprene gloves.
Skin and Body Protection: Wear acid resistant boots, apron or clothing. Use decontamination facilities (eye bath,
safety shower, washing facilities).
Protective Gloves: Rubber or neoprene gloves.
Eye Protection: Safety glasses with side shields and avoid eye contact.
Other Protective Clothing or Equipment: Protective clothing is required where repeated or prolonged skin contact
may occur.
Work/Hygienic Practices: Remove jewelry, rings, watches and any other metallic objects while working on batteries.
All tools should insulate to avoid the possibility of shorting connections. DO NOT lay tools on top of battery. Be sure to
electricity from tools and individual person by touching a grounded surface in the vicinity of the batteries, but are heavy.
Serious injury can result from improper lifting or installation. DO NOT lift, carry, install or remove pulling the terminal
posts for safety reasons and because terminal posts and post seals may be damaged. DO KEEP a fire extinguisher
and emergency communications the work area.
General Physical Form: The battery is solid. Sulfuric Acid is a liquid.
Odor: The battery is odorless.
Solubility in Water: Lead, Lead Oxide and Lead Sulfate are insoluble in water. Sulfuric Acid is 100% soluble in water.
Stability: Stable under normal conditions.
Conditions to Avoid: Sparks and other sources of ignition. Prolonged overcharge. Fire or explosion hazard due to
possible hydrogen gas generation.
Incompatibility: Combination of sulfuric acid with combustibles and organic materials may cause fire and explosion.
Avoid strong reducing agents, most metals, carbides, chlorates, nitrates, picrates.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
SECTION 10 - STABILITY AND REACTIVITY