OPERATOR'S MANUAL VersaLite™ Electric String Trimmer UT41002A Your trimmer has been engineered and manufactured to Homelite's high standard for dependability, ease of operation, and operator safety. When properly cared for, the trimmer will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a Homelite product.
TABLE OF CONTENTS Introduction .............................................................................................................................................................. 2 Safety ................................................................................................................................................................... 3-4 Symbols ..............................................................................................................................
SAFETY WARNING: When using electric gardening appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: READ ALL INSTRUCTIONS GENERAL SAFETY RULES Clear the work area before each use. Remove all objects, such as rocks, broken glass, nails, wire, or string that can be thrown or become entangled in the cutting line. Wear heavy, long pants, boots, and gloves.
SAFETY To reduce the risk of electrical shock, use only roundjacketed extension cords approved for outdoor use, such as cords of type SW-A, SOW-A, STW-A, STOW-A, SJOW-A, SJTW-W, or SJTOW-A. Since this tool is double insulated, you may use a 2-wire extension cord (an extension cord without a ground). However, you may also use a 3-wire extension cord (an extension cord with a ground) that has a NEMAtype connector (parallel blade, U ground). Extension cords are available from your local retailer.
SYMBOLS Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool more safely and effectively. SYMBOL NAME EXPLANATION Safety Alert Indicates danger, warning or caution. Attention is required to avoid serious personal injury. May be used in conjunction with other symbols or pictographs. Ricochet Thrown objects can cause severe injury. Wear protective clothing and boots.
SPECIFICATIONS MOTOR Motor Type ......................................................................................................................................................... 120 V AC Operating RPM ......................................................................................................................................................... 7500 Amperage .......................................................................................................................................
FEATURES TOP-MOUNTED MOTOR GRASS DEFLECTOR The top-mounted motor improves balance and is located away from the dust and debris of the cutting area. The trimmer includes a grass deflector that helps protect you from flying debris. CORD RETAINER The cord retainer helps prevent accidental unplugging of the extension cord. ERGONOMIC DESIGN The design of the trimmer provides for easy handling. It is designed for comfort and ease of grasp when operating in different positions and at different angles.
ASSEMBLY CONNECTING THE ATTACHMENT TO THE UPPER SHAFT See Figure 2. The coupler connects the attachment to the upper shaft. Follow these steps to connect the attachment to the upper shaft. Loosen the knob by turning it counterclockwise. Remove the end cap from the attachment shaft. Align the button with the guide recess on the upper shaft. Slide the attachment shaft into the upper shaft until the attachment shaft clicks into place.
ASSEMBLY ATTACHING THE GRASS DEFLECTOR WING NUT GRASS DEFLECTOR See Figure 4. WASHER WARNING: The line cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contact can result in serious personal injury. Follow these steps to attach the grass deflector. Slide the grass deflector onto the attachment shaft and fit it over the bracket. Install the bolt through the holes in the tabs on the grass deflector and the slots in the bracket on the attachment shaft.
OPERATION WARNING: The product may throw objects during operation, causing injury to the operator or to bystanders. Always wear suitable eye protection, boots, gloves, and long, heavy pants while operating the product. STARTING AND STOPPING THE TRIMMER See Figure 7. To start the trimmer: Press the trigger. To stop the trimmer: Release the trigger. OPERATING THE TRIMMER See Figure 8. Follow these steps to operate the trimmer. Plug the trimmer cord into an extension cord approved for outdoor use.
OPERATION The tip of the cutting line will wear during use; this reduces the cutting swath. If the line is not advanced occasionally, it will wear down to the eyelet. When the trimmer stops, the line tends to relax and may retract into the trimmer head assembly. Should this occur, unplug the trimmer, remove the spool, refeed the line through the eyelets, and reassemble the spool. Avoid hitting objects with the line, such as chain-link fences or concrete, as this causes rapid wear.
OPERATION CUT OFF BLADE This trimmer is equipped with a cut-off blade on the grass deflector. For best cutting, advance string until it is trimmed to length by the cut-off blade. Advance string whenever you hear the engine running faster than normal. This will maintain best performance and keep string long enough to advance properly. CUTTING TIPS See Figure 11. Keep the trimmer tilted toward the area being cut; this is the best cutting area. Do not cut in dangerous cutting area.
MAINTENANCE WARNING: Use only identical Homelite replacement parts when servicing this product. Use of any other parts may create a hazard or cause product damage. CLEANING THE TRIMMER Release the trigger, allow the trimmer to coast to a stop, and unplug the trimmer before cleaning. Clean the exterior of the trimmer with a soft, dry cloth. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
MAINTENANCE Insert the end of the new line into the hole in the upper threaded area of the spool. Wind the line counterclockwise around the spool following arrows on spool. Do not overfill. NOTE: After winding the line, there should be about 6 in. (152 mm) between the wound line and the outside edge of the spool. Secure the line temporarily by pushing it into one of the slotted tabs on the spool.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Line will not advance when tap 1. Line is welded to itself. retaining cap 2. Not enough line on spool. 3. Line is worn too short. 4. Line is tangled on spool. 1. Lubricate with Homelite silicone spray. 2. Install more line (Refer to “Replacing the Cutting Line” earlier in this manual). 3. Pull lines while alternately pressing down on and releasing spool retainer. 4.
ACCESSORIES REPLACEMENT PARTS String Head (RH Thread) .080 in. (2 mm) ...................................................................................................... DA03001A Spool & Line .080 in. (2 mm) ............................................................................................................................ UP00145 String Refill .080 in. (2 mm); 390 ft. (118 mm) ....................................................................................................
WARRANTY LIMITED WARRANTY STATEMENT Homelite Consumer Product, Inc. warrants to the original retail purchaser that this HOMELITE product is free from defect in material and workmanship and agrees to repair or replace, at Homelite Consumer Products, Inc.'s discretion, any defective product free of charge within these time periods from the date of purchase.
OPERATOR'S MANUAL VersaLite™ Electric String Trimmer UT41002A CUSTOMER SERVICE INFORMATION For parts or service, contact your nearest Homelite authorized service dealer. Be sure to provide all relevant information when you call or visit. For the location of the authorized service dealer nearest you, please call 1-800-chainsaw (1-800-242-4672) or visit us online at www.homelite.com. The model number of this tool is found on a plate attached to the motor housing.
