User manual

Start-up Start-up
22
23
5 Start-up
This section describes how to set up your HomematicIP
climate control solution step by step.
First install the Homematic IP app on your smartphone
and set up your Access Point as described in the fol-
lowing sections. Once your Access Point has been
installed successfully, you can add and integrate new
Homematic IP devices to your system.
5.1 Set-up and mounting
The Homematic IP app is available for iOS and
Android and can be downloaded for free in the
corresponding app stores.
• Please download the app in the app store and
install it on your smartphone.
• Start the app.
• Place the Access Point close to your router and
a socket.
The device is not a toy; do not allow children to
play with it. Do not leave packaging material ly-
ing around. Plastic films/bags, pieces of poly-
styrene, etc. can be dangerous in the hands of
a child.
For power supply, only use the original plug-in
mains adapter (5 VDC/550 mA) delivered with
the device.
The device may only be connected to an easily
accessible power socket outlet. The mains
adapter must be pulled out if a hazard occurs.
Always lay cables in such a way that they do not
become a risk to people and domestic animals.
The device may only be operated within resi-
dential buildings.
Using the device for any purpose other than
that described in this operating manual does
not fall within the scope of intended use and
shall invalidate any warranty or liability.
• Scan the QR code (B) on the back side of
your Access Point. You can also enter the de-
vice number (SGTIN) (B) of your Access Point
manually.
• Please confirm in the app if the LED of your Ac-
cess Point lights up permanently blue.
• Connect the Access Point with the router using
the supplied network cable (F). Provide power
supply for the device using the supplied plug-in
mains adapter (G).
LAN
F
G