Instructions

30
Maintenance and cleaning
compensator (see figure 9).
• Place the dimming compensator onto the DIN
rail using the mounting adapter (see fig. 10).
Make sure that the catch spring of the mounting
adapter engages properly and securely on the
rail.
• Connect the dimming compensator according to
the connection diagram (see figure 4).
• Replace the cover of the power distribution panel.
• Switch the fuse back on.
6 Maintenance and cleaning
The product does not require any maintenance.
Enlist the help of an expert to carry out any
repairs.
The mains voltage must be disconnected before
the device is removed (trip the miniature circuit-
breaker). Only qualified electricians (to VDE 0100)
are permitted to carry out work on the 230 V
mains.
Clean the device using a soft, lint-free cloth that is clean
and dry. Do not use any detergents containing solvents,
as they could corrode the plastic housing and label.