operation manual
42
Technical specifications
The range of transmission within buildings can
dier greatly from that available in the open air.
Besides the transmitting power and the reception
characteristics of the receiver, environmental
factors such as humidity in the vicinity have an
important role to play, as do on-site structural/
screening conditions.
Hereby, eQ-3 AG, Maiburger Str. 29, 26789 Leer/Ger-
many declares that the radio equipment type Home-
matic IP HmIP-FSM is in compliance with Directive
2014/53/EU. The full text of the EU declaration of con-
formity is available at the following internet address:
www.eq-3.com
10 Technical specifications
Device short description:
HmIP-FSM
Supply voltage: 230 V/50 Hz
Current consumption: 5 A max.
Standby power consumption:
0.2 W
Max. switching capacity: 1150 W
Kind of load: ohmic load, cosφ≥0.95
Relay: NO contact, 1-pole, µ
contact
Cable type and cross section:
rigid and flexible cable,
0.75-1.5 mm²