operation manual

44
Replacing batteries
Manufacturer Frame
Berker S.1, B.1, B.3, B.7 glass
ELSO Joy
GIRA System 55, Standard 55, E2, E22,
Event, Esprit
merten 1-M, Atelier-M, M-Smart, M-Arc, M-
Star, M-Plan
JUNG A 500, AS 500, A plus, A creation
6 Replacing batteries
If an empty battery is displayed via the app or the
device (see „7.4 Error codes and flashing sequences“
on page 47), replace the used batteries by two new
LR03/micro/AAA batteries. You must observe the correct
battery polarity.
To replace the batteries of the temperature and humidity
sensor, please proceed as follows:
• Once mounted, the sensor can easily be pulled
out of the frame (A) or removed from the mount
-
ing plate (E). To remove the sensor (B) from the
frame, take hold of the sides of the sensor and pull
it out (see figure 2). You do not need to open the
device.