User manual
38
The device has not been designed to support
safety disconnection.
3 Function
The HomeMatic ush-mounted blind acuator is suita-
ble for installation in ush-mounting boxes installed in
the house.
It is intended for connecting ush-mounted cables for
AC motors used with shutters, blinds and canopies.
Please pay attention to the total output when several
motors are connected.
The actuator controls connected motors in accordance
with the wireless commands it receives or by operating
the rocker. Commands are transmitted by pressing
battery-operated buttons or remote controls, or via a
software interface. It is also possible to control actu-
ators via taught-in sensors. When an event occurs,
the sensors transmit a command (in the same way as
a button). Refer to the manual for the corresponding
sensor for more detailed information.
You can also operate the HomeMatic ush-mounted
shutter actuator manually using the rocker at any
time. Pressing the relevant button briey moves the